How we pick
Your answers rule gateways out before anything is ranked. Wireless-only rules out gateways without Wi-Fi. Needing to send data onto the bus rules out read-only gateways. Your reading software has to be supported. What's left is ranked by how natively it talks to your software, whether it fits your budget, and how easy it is for a first install. We only recommend gateways we've reviewed, and every spec in the table below links to its source, usually the manufacturer's own page or manual.
Wi-Fi, USB or Ethernet
Wi-Fi gateways broadcast boat data to phones, tablets and laptops with no cable, which is why they're the default for most boats. USB gateways are the cheapest, most reliable way to feed one nearby computer, such as a Raspberry Pi running Signal K. Ethernet gateways plug into the boat's router or switch, so every device on the network can use the data and the cable run can be long.
Why not a $30 USB-CAN adapter?
Generic USB-CAN adapters can work for experienced tinkerers. On our own test boat a cheap adapter read the bus, but we never got it to transmit (the cause was never pinned down). The Home Assistant integration we tried expected Actisense-format data and left every sensor unavailable. Our field notes have the details. The picker only suggests the DIY option for a Pi or mini PC with a cable run, and always with that warning.
All the gateways we cover
| Gateway | Connects by | Sends to bus | Works with | Price |
|---|---|---|---|---|
| Yacht Devices YDWG-02Yacht DevicesSources: spec · software · price | Wi-Fi | Yes | Signal K, OpenCPN, Home Assistant (partial), Phone/tablet apps, Expedition | about $249checked 2026-11-04 |
| Digital Yacht iKonvert USBDigital YachtSources: spec · software · price | USB | Yes | Signal K, OpenCPN, Home Assistant (partial) | about $212checked 2026-11-04 |
| Actisense NGX-1-USBActisenseSources: spec · software · price | USB | Yes | OpenCPN | about $259checked 2026-11-04 |
| Yacht Devices YDNU-02Yacht DevicesSources: spec · software · price | USB | Yes | Signal K (partial), OpenCPN, Home Assistant (partial), Expedition | about $249checked 2026-11-04 |
| CANable 2.0 (DIY USB-CAN)CANableSources: spec & price · software | USB-CAN (DIY) | No | Signal K (partial), Home Assistant (partial) | about $35from our field-notes guide, not re-checked |
| Yacht Devices YDEN-03Yacht DevicesSources: spec & software · price | Ethernet | Yes | Signal K, OpenCPN, Home Assistant (partial), Phone/tablet apps (partial), Expedition | about $249checked 2026-11-04 |
| Digital Yacht LANLink NMEA 2000Digital YachtSources: spec & software & price | Ethernet | Yes | Phone/tablet apps (partial) | about $450checked 2026-11-04 |
Frequently asked questions
Should I get a Wi-Fi, USB or Ethernet gateway?
It depends on what reads the data. A Wi-Fi gateway such as the Yacht Devices YDWG-02 makes its own network (or joins your boat's), so phones, tablets and laptops connect to it directly with no driver. A USB gateway plugs into one laptop or a Raspberry Pi and suits chart software and Signal K servers. An Ethernet gateway such as the Yacht Devices YDEN-03 plugs into your boat's router or a chartplotter network, so several computers can share the data; phones reach it only through the router's Wi-Fi.
Can a USB gateway feed my phone?
No, not on its own. Phone and tablet apps such as Navionics, Aqua Map and iNavX need the data over Wi-Fi (NMEA 0183 over TCP or UDP). A USB gateway only talks to the computer it's plugged into, so you'd need another device, such as a Signal K server, to re-serve the data over Wi-Fi. Of the gateways in the picker, only the YDWG-02 feeds a phone with no extra hardware.
Will it control my autopilot?
Only a two-way gateway can send commands onto the bus, and only with software that sends them. The Yacht Devices gateways can control Raymarine SeaTalk NG autopilots, but transmit is off by default: the YDWG-02's servers ship as "Transmit Only" and the YDEN-03's as "From NMEA 2000", so set the server you use to both directions first. The Actisense NGX-1 works as a two-way NMEA 0183↔2000 converter or as a PC gateway, not both at once; older firmware reverted to converter mode at power-off (fixed in 3.068). No source we found says any of these gateways can switch CZone circuits.
Does it work with Home Assistant?
Not directly. None of these gateways has a native Home Assistant integration. The documented route is gateway, then a Signal K server, then the signalk-ha integration (installed through HACS), which reads the Signal K server's data. So Home Assistant works only where Signal K can read the gateway.
Why isn't the YDEN-02 listed?
It has been replaced by the YDEN-03, which Yacht Devices' 2025 catalog says differs from the YDEN-02 by a more powerful processor. The US distributor sells the YDEN-03 at the same $249.